Designer: Jennifer Smith
Ravelry: Fuzzbump
Hello Amigurumi Lovers…
One of the free amigurumi crochet patterns we will share today is the Mimikyu Pokemon, whose photos and design belong to Jennifer Smith. You can learn how to crochet these Mimikyu Pokemon using the free amigurumi pattern. Thanks to dear Jennifer Smith for this cute Mimikyu Pokomen.
Amigurumi cats, amigurumi dolls, amigurumi dogs, amigurumi unicorns, amigurumi lambs, amigurumi dinosaurs, amigurumi foxes, amigurumi bears, amigurumi giraffes, amigurumi pigs, amigurumi birds, amigurumi penguins, amigurumi panda, amigurumi llama, amigurumi bunny, amigurumi clowns, amigurumi elephants, amigurumi hippos, amigurumi monkeys will not be difficult for you…
Materials
DK weight yarn
Yellow
Black
Brown (tail)
Orange (cheek spots)
2.35 mm crochet hook
Poly-fil
Needle
Weighted pellets (optional)
AMIGURUMI POKEMON FREE PATTERN
Head
1. With yellow, 8 sc into MR (8)
2. 8 inc (16)
3. (sc, inc) x 8 (24)
4. (3 sc, inc) x 6 (30)
5. (4 sc, inc) x 6 (36)
6. (5 sc, inc) x 6 (42)
7. 42 sc (42)
8. (6 sc, inc) x 6 (48)
9-14. (6 rounds) 48 sc (48)
15. (7 sc, inc) x 6 (54)
16-19. (4 rounds) 54 sc (54)
20. (7 sc, dec) x 6 (48)
21. 3 sc, dec, (6 sc, dec) x 5, 3 sc (42)
22. (5 sc, dec) x 6 (36)
23. 2 sc, dec, (4 sc, dec) x 5, 2 sc (30)
24. (3 sc, dec) x 6 (24)
Fasten off and leave a long tail to join to the body
Stuff head with filling
Right Ear
1. With black, 6 sc into MR (6)
2-3. (2 rounds) 6 sc (6)
4. (sc, inc) x 3 (9)
5. 7 hdc, 2 sc (9)
6. 7 dc, 2 sc. Cut black, join yellow (9)
7. With yellow, (2 sc, inc) x 3 (12)
8-9. (2 rounds) 12 sc (12)
10. (3 sc, inc) x 3 (15)
11-12. (2 rounds) 15 sc (15)
13. (4 sc, inc) x 3 (18)
14-15. (2 rounds) 18 sc (18)
Fasten off and leave a long tail to join to the head. Weave in ends
Left Ear
1. With black, 6 sc into MR (6)
2-3 (2 rounds) 6 sc (6)
4. 3 inc, 3 sc (9)
5-6. (2 rounds) 3 inc, 3 dec. Cut black, join yellow (9)
7. With yellow, (2 sc, inc) x 3 (12)
8-9. (2 rounds) 12 sc (12)
10. 5 sc, 2 inc, 3sc, inc, sc (15)
11-12. (2 rounds) 15 sc (15)
13. (4 sc, inc) x 3 (18)
14-15. (2 rounds) 18 sc (18)
Fasten off and leave a long tail to join to the head. Weave in ends
Stuff ears loosely and attach to the head. Embroider spiral eyes, cheek spots, and mouth *because of the imperfect and scribbled design of Mimikyu’s face, there is really no wrong way to do this. Put the facial features wherever you want*
Body
1. With black, 8 sc into MR (8) *leave a long tail on the outside of the body to be used for anchoring the head later (12in or more)*
2. 8 inc (16)
3. (sc, inc) x 8 (24)
4. (2 sc, inc) x 8 (32)
5. (3 sc, inc) x 8 (40)
6. 40 sc. Cut black, join yellow (40)
7. With yellow, BLO (4 sc, inc) x 8 (48)
8. BLO (48)
9-12. (4 rounds) 48 sc (48)
13. (4 sc, dec) x 8 (40)
14-16. (3 rounds) 40 sc (40)
17. (3 sc, dec) x 8 (32)
18. 32 sc (32)
19. (2sc, dec) x 8 (24)
20-25. (6 rounds) 24 sc (24)
Fasten off and weave in ends. Stuff firmly at the bottom and loosely at the top for the head to be floppy. Weighted plastic pellets can be added to the bottom of the body to help prevent the toy from falling over due to the weight of the head
Body Frills
1. Black front loops: (4 sc, inc) x 8 (48)
2. (5 sc, inc) x 8 (56)
3. tc, dc, hdc, slip, (slip, hdc, dc, tc, dc, hdc, slip) x 7, slip, hdc, dc (56)
Fasten off and weave in ends
1. Yellow front loops: (5 sc, inc) x 8 (56)
2. (slip, hdc, dc, tc, dc, hdc, slip) x 8 (56)
Fasten off and weave in ends
With black, embroider little eyes onto the body
Sew head onto the body
Anchoring the Head
Since the head doesn’t flop over on its own, thread the black body tail from the MR through a long needle and poke it through the top right part of the body near round 20, thread it horizontally through 1-2 stitches on the bottom right side of the head near round 22, and poke it back through where it came out of the body and through the bottom where the MR starts. Pull tight so the head and body are touching and no thread is exposed. Tie off with a knot and weave in end.
Tail
1. With brown, 8 sc into MR (8) *leave a long tail to attach to body*
2-4. (3 rounds) 8 sc (8)
5-6. (2 rounds) ch 1, turn, 4 sc (8)
7. 4 inc, 4 sc (12)
8-9. (2 rounds) (sc, inc) x 3, 3 dec (12)
10. 9 sc, ch 1, turn, 6 sc (12)
11. ch 1, turn, 6 sc (12)
*If using a marker, remove marker and place at BOR. This is your new BOR*
12. sc, 4 inc, 7 sc (16)
13-14. (2 rounds) (sc, inc) x 4, 4 dec (16)
15-18. (4 rounds) 16 sc (16)
19. (2 sc, dec) x 4 (12)
20. 6 dec (6)
Do not stuff tail. Fasten off and weave in end
Sew the tail onto the body
Enjoy your new Mimikyu plush!
More Amigurumi pokemon ideas:
